close
Forums
Fusion 360 support
Boat Design
Help adding spray r...
 
Notifications
Clear all

Help adding spray rails

    Last Post

jamhu01
Posts: 65
 jamhu01
Topic starter
22/08/2020 15:28
(@jamhu01)
Trusted Member
Joined: 2 years ago

Hello Ben. I am trying to add some spray rails to my boat using your video but I am not able to would you pleas be able to look at my boat and see if it would be possible to do and give me some pointers. Thanks here is the F3d

12 Replies
jamhu01
Posts: 65
 jamhu01
Topic starter
23/08/2020 03:24
(@jamhu01)
Trusted Member
Joined: 2 years ago

Reply
1 Reply
Ben K.
 Ben K.
Admin
(@benk)
Joined: 4 years ago

Member
Posts: 366
23/08/2020 11:03
Reply tojamhu01jamhu01

@jamhu01,

Do you have a picture of the spray rails that you want? I need to know the locations, Shap, and length.

Reply
jamhu01
Posts: 65
 jamhu01
Topic starter
23/08/2020 14:17
(@jamhu01)
Trusted Member
Joined: 2 years ago

ok yes I will send one 

Reply
jamhu01
Posts: 65
 jamhu01
Topic starter
23/08/2020 15:19
(@jamhu01)
Trusted Member
Joined: 2 years ago

Here are the back and I also tried to make the front dementions but if you do not need the front that is ok. 

Reply
Ben K.
Posts: 366
 Ben K.
Admin
23/08/2020 15:25
(@benk)
Member
Joined: 4 years ago

Check out this file, I have made this boat to a customer and it's very similar to yours.

Reply
jamhu01
Posts: 65
 jamhu01
Topic starter
23/08/2020 15:47
(@jamhu01)
Trusted Member
Joined: 2 years ago

OK thank you i did check it out and i tried to make mine like it but not luck when i loft if with the rail. do you know why i am getting the error 

Reply
1 Reply
Ben K.
 Ben K.
Admin
(@benk)
Joined: 4 years ago

Member
Posts: 366
23/08/2020 15:50
Reply tojamhu01jamhu01

@jamhu01

Please create a screencast, so I could see exactly what you are trying to do.

Reply
jamhu01
Posts: 65
 jamhu01
Topic starter
23/08/2020 16:19
(@jamhu01)
Trusted Member
Joined: 2 years ago

https://screencast-o-matic.com/watch/cYj02bmFWb  

Reply
1 Reply
Ben K.
 Ben K.
Admin
(@benk)
Joined: 4 years ago

Member
Posts: 366
23/08/2020 16:24
Reply tojamhu01jamhu01

@jamhu01

You must make sure that those edges are touching your profiles. You could also use Project 3d to turn the edges into geometry and it would be easier to select.

Reply
jamhu01
Posts: 65
 jamhu01
Topic starter
23/08/2020 17:22
(@jamhu01)
Trusted Member
Joined: 2 years ago

Could you create a screen cast to show me if you have some space time 

Reply
jamhu01
Posts: 65
 jamhu01
Topic starter
23/08/2020 17:27
(@jamhu01)
Trusted Member
Joined: 2 years ago

I just tired it and it did not work for me 

Reply
jamhu01
Posts: 65
 jamhu01
Topic starter
25/08/2020 01:29
(@jamhu01)
Trusted Member
Joined: 2 years ago

is they a nuther technique i should use 

Reply
  All forum topics
  Previous Topic
Next Topic  
© 2020 All rights Reserved. Design by TESREG.com &
chiefDreamer.com

Follow Us

cross
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram